Monitor Scantool Data
1.

Connect Scantool to Data Link Connector (DLC).

2.

Warm engine up to normal operating temperature.

3.

Turn "OFF" electrical devices and A/C.

4.

Monitor " A/C PRESSURE SENSOR " parameter on the scantool.

1)

Specification :

A/C "OFF" : 1200mV~1800mV

A/C "ON" : Higher than A/C "OFF" pressure by more than 500mV

note

A/C pressure transducer voltage varies too much, therefore do not concern too much about the figure instead, check the rising tendancy of A/C pressure transducer.

Яндекс.Метрика