3.
Measure resistance between terminals 1 and 2 of the injector connector(Component side)
Temp.(°C) | Temp.(°F) | Resistance (Ω) |
20 | 68 | 13.8 ~ 15.2 |
Ignition "OFF"
Disconnect injector connector
Measure resistance between terminals 1 and 2 of the injector connector(Component side)
Temp.(°C) | Temp.(°F) | Resistance (Ω) |
20 | 68 | 13.8 ~ 15.2 |
Is resistance within the specification?
YES
▶ Go to next step as below
NO
▶ Check injector for contamination, deterioration, or damage. Substitute with a known-good injector and check for proper operation. If the problem is corrected, replace injector and then go to "Verification of Vehicle Repair" procedure
