Monitor Scantool Data
1.

Connect Scantool to Data Link Connector (DLC).

2.

Warm engine up to normal operating temperature.

3.

Turn "OFF" electrical devices and A/C.

4.

Monitor "FUEL PRESSURE MEASURED", "RAIL PRESS. REGULATOR1", "INJ. PUMP REGULATOR" parameter on the Scantool.

1)

Specification :

Idle(without load)

Accelerating(stall test)

Diagnosis

INJ. PUMP REGULATOR

38 ± 5%

32 ± 5%

Duty decreases

FUEL PRESSURE MEASURED

28.5 ± 5 Mpa

145 ± 10 Mpa

Press. increases

RAIL PRESS. REGULATOR1

19 ± 5%

48 ± 5%

Duty increases

note

The waveform of Fuel pressure regulator valve installed at high pressure pump(fuel detecting MPROP) shows 38% duty at idle, Duty drop means the decrease of current.

→ Fuel delivered to common rail increases as current drops.

The waveform of rail pressure regulator valve installed at common rail shows 19% duty at idle, duty rises to approx. 48% at acceleration to raise rail pressure. Duty rise means the increase of current.

→ If current rises, the returning quantity of fuel deliverd to common rail decreases and common rail pressure rises.

Яндекс.Метрика