5.
Does change of sensor power supply occur as connecting sensor connector?
YES
a.
Replace related sensors.(rail pressure sensor, accel pedal sensor, boost pressure sensor)
NO
a.
Go to "Verification of Vehicle Repair".
IG KEY "OFF", ENGINE "OFF".
Disconnect RPS connector, APS connector, BPS connector.
Check that sensor connector power supply is within the specification after turning IG KEY "ON".
Connect RPS connector and APS connector in turn.
Specification : Sensor power supply should not change as connecting RPS connector, APS connector, BPS connector.
( If the change of sensor power supply occur as connecting sensor connector, this means the occurrence of short inside of sensor.)
Does change of sensor power supply occur as connecting sensor connector?
YES
Replace related sensors.(rail pressure sensor, accel pedal sensor, boost pressure sensor)
NO
Go to "Verification of Vehicle Repair".
