3.
Check continuity between clutch switch component terminal 1 and 2 as depressing clutch pedal.
1)
Specification : Clutch pedal depressed : Continuity ( below 1.0Ω )
Clutch pedal released : Discontinuity ( Infinite Ω )
IG KEY "OFF", ENGINE "OFF".
Disconnect clutch switch connector.
Check continuity between clutch switch component terminal 1 and 2 as depressing clutch pedal.
Specification : Clutch pedal depressed : Continuity ( below 1.0Ω )
Clutch pedal released : Discontinuity ( Infinite Ω )
Is the measured resistance within the specification?
YES
Go to "Verification of Vehicle Repair".
NO
After checking height of clutch pedal, if therer is no problem, replace clutch switch and go to "Verification of Vehicle Repair".
