3.
Measure resistance of IATS component terminal 3 and 2, referring to resistance characteristic table of specification of General information.
1)
Specification : Refer to Specification of General Information.
IG KEY "OFF", ENGINE "OFF".
Disconnect MAFS connector.
Measure resistance of IATS component terminal 3 and 2, referring to resistance characteristic table of specification of General information.
Specification : Refer to Specification of General Information.
Is the measured resistance at certain temperature within the specified resisance range at the temperature?
YES
Go to "Verification of Vehicle Rapair"
NO
Replace MAFS ASSY’ and go to "Verification of Vehicle Repair".
