ECM is activated by power supply. Signals from several sensors, such as CKPS and APS, is inputted to ECM. Comparing inputted siganals with control LOGIC saved at micro controller and EEPROM, ECM controlls engine as actuating injectors, solenoids and relays. To guarantee accurate control, ECM performs SELF TEST, DIAGNOSIS of several sensors and actuators. And if serious trouble which affects vehicle performance occurrs, ECM sets DTCs.
At certain cases, ECM shuts down whole systems in order to prevent dangerous situation due to incorrect control.
P0602 is set when data writing on EEPROM inside of ECM is impossible.This code is due to the failure of ECM(ECM hardware failure).
Item | Detecting Condition | Possible Cause | ||
DTC Strategy | ● EEPROM monitorting | ● ECM component failure | ||
Enable Conditions | ● Engine running | |||
Threshold Value | ● When data writing on EEPROM inside of ECM is impossible | |||
Diagnostic Time | ● Immediately | |||
Fail Safe | Fuel Cut | YES | ||
EGR Off | NO | |||
Fuel Limit | NO | |||
MIL | OFF | |||
