Component Inspection
1.

IG KEY "OFF", ENGINE "OFF".

2.

Disconnect neutral gear switch connector.

3.

Check the contituity between neutral gear switch component terminal 1 and terminal 2 as shifting gear lever 2~3 times.

1)

Specification : The measured resistance varies from below 1.0Ω(Continuity) to infinite Ω(Discontinuity) in accordance with gear shifting.

4.

Is the measured resistance within the specification?

YES

a.

Go to "Verification of Vehicle Repair".

NO

a.

Replace neutral gear switch and go to Verification of Vehicle Repair".

Яндекс.Метрика