Monitor Scantool Data
1.

Connect Scantool to Data Link Connector (DLC).

2.

Warm engine up to normal operating temperature.

3.

Turn "OFF" electrical devices and A/C.

4.

Monitor "INLET THROTTLE ACTU." parameter on the Scantool.

1)

Specification : 4.7% duty outputted except the operation of throttle flap

95% duty outputted at the operation of throttle flap

note

Monitoring if the state of throttle control actuator changes at turning engine OFF because the communication through Scantool is comleted 3 sec. after turning engine ON. It is the easiest way to check if throttle control actuator is closed for about 1 sec. and opened again with eyes(visually) or ears(sound) in order to inspect component operation.

Яндекс.Метрика