6535556

Component Inspection

1.

IG KEY "OFF", ENGINE "OFF".

2.

Disconnect APS connector.

3.

Check resistance for each terminal refering to Resistance characteristic table.

1)

Specification : Resistance characteristic table for each terminal

	Checking point	Resistance ( KΩ 20℃ )		Characteristic	Component connector shape
	Checking point	Pedal Depressed	Pedal released	Characteristic	Component connector shape
APS 1	5(power)-4(ground)	1.0±0.1KΩ	1.0±0.1KΩ	Unchanged
	5(power)-3(signal)	1.8±0.1KΩ	1.1±0.1KΩ	Resistance drops
	3(signal)-4(ground)	1.1±0.1KΩ	1.8±0.1KΩ	Resistance rises
APS 2	6(power)-2(ground)	2.0±0.1KΩ	2.0±0.1KΩ	Unchanged
	6(power)-1(signal)	2.9±0.1KΩ	2.1±0.1KΩ	Resistance drops
	1(signal)-2(ground)	1.1±0.1KΩ	1.8±0.1KΩ	Resistance rises

4.

Are resistances for each terminal measured correctly?

YES

a.

Go to "Verification of Vehicle Rapair".

NO

a.

Replace APS and go to "Verification of Vehicle Rapair".