3.
Measure the resistance between injector component terminal 1 and terminal 2.
1)
Specification : 0.255 ± 0.04Ω (20℃)
IG KEY "OFF", ENGINE "OFF"
Disconnect injector connector.
Measure the resistance between injector component terminal 1 and terminal 2.
Specification : 0.255 ± 0.04Ω (20℃)
Is the measured resistance(of injector solenoid) within the specification?
YES
Go to "Control Circuit Inspection".
NO
Replace injector and go to "Verification of Vehicle Repair".
Replacing injectors, peculiar IQA code of each injector should be inputted to ECM
Perform this process using "INJECTOR CORRECTION" function on scantool, Refer to P1670, P1671 for more detailed information.
