Component Location
General Description

Rail press. regulator valve(RPRV) is installed in common rail and controls common rail pressure fast as regulating returning quantity of fuel which is delivered to common rail when fast rise of rail pressure is required like the moment of turning engine ON or when fast relief of pressure is required like at the point of deceleration. The lower RPRV current is, the more fuel is supplied to common rail. Thus it leads rail pressure to be high. On the contrary, the higher RPRV current is, the less fuel is supplied to common rail.

DTC Description

P0089 is set when excessive current in control circuit of Rail Pressure regulator valve(integrated with common rail) is detected for more than 0.22 sec.. This code is due to short to battery in control circuit or Rail Pressure regulator valve internal short.

DTC Detecting Condition

Item

Detecting Condition

Possible Cause

DTC Strategy

● Voltage monitoring

● RPRV circuit

● RPRV component

Enable Conditions

● IG KEY "ON"

Threshold Value

● Short to battery in control circuit

Diagnostic Time

● 0.22 sec.

Fail Safe

Fuel Cut

YES

EGR Off

NO

Fuel Limit

NO

Check Lamp

ON

Specification

Rail pressure regulator valve resistance

Operating frequancy

3.42 ~ 3.78Ω (20℃)

1000Hz(1KHz)

Schematic Diagram
note
To view Flash content, you need to install the appropriate browser extension
Signal Waveform
Яндекс.Метрика