Component Location
General Description

Knocking is a phenomenon characterized by undesirable vibration and noise that can cause engine damage. A knock sensor (KS) is mounted on the cylinder block and senses engine knocking. A knocking vibration from the cylinder block is applied as pressure to the piezoelectric element. A knock sensor (KS) detects vibration when RPM rises or drops and generates voltages based on this vibration. The PCM controls the ignition timing based on the amplitude and frequency of the knock sensor signal. For example, if engine knocking occurs, the ignition timing is retarded to prevent it.

DTC Description

If the normalized reference signal exceeds the upper limit based on engine RPM , P0328 is set.

DTC Detecting Condition

Item

Detecting Condition

Possible Cause

DTC Strategy

● Signal check

● Poor connection

● Short to power in signal circuit

● Knock sensor

Enable Conditions

● Coolant temperature > 40 ℃

Threshold Value

● Normalized reference level > upper limit, f(rpm)

Diagnostic Time

● Continuous

MIL ON Condition

● DTC only

Specification

Item

Specification

Capacitance

950~1,350pF

Schematic Diagram
note
To view Flash content, you need to install the appropriate browser extension
Signal Waveform
Яндекс.Метрика