Monitor Actuation Test
1.

Connect scantool to Data Link Connector(DLC)

2.

Ignition "ON" & Engine "OFF".

3.

Select the "Actuation Test" mode on the scantool.

4.

Inspect opearating status of Rear right valve(out) with Actuation Test.

1)

Specification : It’s normal if operating sound is heard.

5.

Does a Rear right valve(out) operate normally?

YES

a.

Fault is intermittent caused by faulty valve or was repaired and HECU memory was not cleared. Go to "Verification of Vehicle Repair" procedure.

NO

a.

Go to "Terminal and Connector Inspection" procedure.

Яндекс.Метрика