EPS CM has a various parameter setting for different steering feeling according to applied region. EPS CM reads a predefined parameter setting according to applied region. Therefore operation to select applied region has to be done.
EPS CM sets this code if selection of applied region isn＇t done.
Item | Detecting Condition | Possible cause |
DTC Strategy | ● Check applied region Flag | ● Selection of applied region isn＇t done. |
Enable conditions | ● IG ON | |
Threshold value | ● Selection of applied region isn＇t done. | |
Fail Safe | ● Default parameter is used for control | |
Restoration conditions | ● After selection of applied region. |
