4.
Check if the main relay works well when it is energized. (If the main relay works normally, a clicking sound can be heard.)
With Ignition OFF, remove the main relay
Measure resistance between terminals 85 and 86 of the main relay(Component side)
Specification : Approx. 70~120Ω at 20°C(68°F)
Apply 12V and a ground to 85 and 86 terminals of the main relay(Components side).
Check if the main relay works well when it is energized. (If the main relay works normally, a clicking sound can be heard.)
Does the main relay operate normally?
YES
▶ Go to next step as below
NO
▶ Check main relay for contamination, deterioration, or damage. Substitute with a known-good main relay and check for proper operation. If the problem is corrected, replace main relay and then go to "Verification of Vehicle Repair" procedure
