Component Inspection
1.

Check golw relay component coil resistance

(1)

IG KEY "OFF", ENGINE "OFF".

(2)

Disconnect glow relay.

(3)

Measure the resistance of glow relay component coil.

1)

Secification : 55±5 Ω (20℃)

(4)

Is the measured resistance within the specification?

YES

a.

Go to "2. Check glow relay component operation" as follows.

NO

a.

Replace glow relay and go to "Verification of Vehicle Repair".

2.

Check glow relay component operation

(1)

IG KEY "OFF", ENGINE "OFF".

(2)

Disconnect glow relay.

(3)

Supplies random B+ and ground to coil sides of glow relay ( terminal 85, terminal 86).

(4)

Check continuity between glow relay terminal 30 and terminal 87.

1)

Secification : When power is supplied : Continuity ( below 1.0Ω )

When power is not supplied : Discontinuity ( Infinite Ω )

(5)

Is the measured resistance within the specification?

YES

a.

Go to "Verification of Vehicle Repair".

NO

a.

Replace glow relay and go to "Verification of Vehicle Repair".

※ Repeat this process 2~3 times.

Яндекс.Метрика