Component Inspection
■ LIN communication line waveform check
1.

IG "OFF"

2.

Connect probe to battery sensor to check signal waveform by using oscilloscope function.

3.

IG "ON" and monitor signal waveform.

Specification : Signal waveform will be displayed as Signal Waveform & Data

4.

Is the measured signal waveform O.K ?

▶ Go to "Verification of Vehicle Repair" procedure.

▶ Substitute with a known - good battery sensor and check for proper operation. If the problem is corrected, replace battery sensor and go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика