4.
Monitor "GLOW RELAY" parameter on the Scantool.
1)
Specification : After operating according to engine coolant temperature and battery voltage, Glow relay turns "OFF".
At IG KEY "ON". (Refer to Specification)
Connect Scantool to Data Link Connector (DLC).
Warm engine up to normal operating temperature.
Turn "OFF" electrical devices and A/C.
Monitor "GLOW RELAY" parameter on the Scantool.
Specification : After operating according to engine coolant temperature and battery voltage, Glow relay turns "OFF".
At IG KEY "ON". (Refer to Specification)
