Engine type | Gasoline 1.4 | Gasoline 1.6 | |
Transaxle type | M5CF1-1 | ||
Gear ratio | 1st | 3.615 | ← |
2nd | 1.962 | ← | |
3rd | 1.370 | ← | |
4th | 1.036 | ← | |
5th | 0.839 | ← | |
Reverse | 3.545 | ← | |
Final gear ratio | 4.400 | 4.267 | |
Items | Standard value [in(mm)] |
Input shaft rear bearing end play | 0.00-0.0019L(0.00-0.05L) |
Output shaft bearing end play (At 70kgf load) | 0.00-0.0019T(0.00-0.05T) |
Input shaft front bearing end play | 0.00-0.0019L(0.00-0.05L) |
Differential bearing end play (At 70kgf load) | 0.0059T-0.0078T(0.15T-0.20T) |
Differential pinion backlash | 0.0039L MAX(0.1L MAX) |
T: Indicate tightening of -(minus) direction of end play
L: Indicate loosening of +(plus) direction of end play
Standard value | Nm | kgf.m | lb-ft | |
Oil drain plug | 60~80 | 6.0~8.0 | 43.4~57.8 | |
Oil filler plug | 60~80 | 6.0~8.0 | 43.4~57.8 | |
Shift control cable bracket on transaxle side | 15~22 | 1.5~2.2 | 10.8~15.9 | |
Rear roll support bracket bolt | 60~80 | 6.0~8.0 | 43.4~57.8 | |
Front roll support bracket bolt | 60~80 | 6.0~8.0 | 43.4~57.8 | |
Transaxle support bracket bolts | 60~80 | 6.0~8.0 | 43.4~57.8 | |
Transaxle mounting bracket bolts | 60~80 | 6.0~8.0 | 43.4~57.8 | |
Clutch release lever fulcrum bolt | 55~60 | 5.5~6.0 | 39.8~43.4 | |
Transaxle upper mounting bolts | 43~55 | 4.3~5.5 | 31.1~39.8 | |
Transaxle lower mounting bolts | to ENG. Block | 43~55 | 4.3~5.5 | 31.1~39.8 |
to Ladder frame | 43~49 | 4.3~4.9 | 31.1~35.4 | |
Always follow torque tightening levels. Failure to follow such levels can result in parts breaking if over-tightened or loosening if under-tightened. In either case, serious personal injury or death could result to vehicle occupants.
Items | Recommnend lubricant | Quantity |
Transaxle gear oil | SAE 75W/85 API GL-4 TGO-7(MS517-14) | 1.9ℓ(2.0US qt, 1.67lmp qt) |
Air Breather | MS721-38 | As requried |
Transaxle housing | MS721-40 or MS721-38 | As requried |
Surface of release fork and bearing | Grease (CASMOLY L9508) | As requried |
