1.
Remove the upper cover (A) from the center console.
Remove the upper cover (A) from the center console.
Remove the center console.(refer to Console in BD group)
Remove the snap pin (A) and remove the select cable assembly.
Remove the cable assembly by pulling the marking parts.
Remove the shift lever assembly (A).
Tightening torque :
9~14N.m (0.9~1.4kgf.m, 6.5~10.1Ib-ft)
Remove the clip (A) from the shift cable.
Remove the retainer (A) and the nuts (B).
Tightening torque :
12~15N.m (1.2-1.5kgf.m, 8.7-10.8Ib-ft)
In case, remove the crush pad and cowl cross bar.
(refer to Crush pad in BD group and Heater unit in HA group)
Remove the cable assembly from the transaxle. (Refer to Manual Transaxle’s removal)
Remove the select and shift cable assemblies.
Check the select cable for proper operation and for damage.
Check the shift cable for proper operation and for damage.
Check the boots for damage.
Check the boots for wear abrasion sticking, restricted movement or damage.
Check for the weak or damaged spring.
Installation is the reverse order of removal.
