Item | Requirement | Remark |
Rated voltage | DC 12V | Shall activate normally in these range. |
Operating voltage range | DC 9 ~ 16V | |
Operating temperature range | -30°C ~ +80°C | |
storage temperature range | -40°C ~ +85°C | |
Max humidity in use | 95% | |
High voltage resistance | 24V | |
Insulation resistance | 100Mohm or more (measured with 500V MEGGER) | Specify as well as parts that insulation like PCB, moisture-proof COATING is required |
Dark Current | Max 5.5mA (KEYLESS) (Included security IND Mean value) Max 3mA (NON-KEYLESS) | Measure when the state, all output loads excepted security IND are OFF and there are no Input SW(including TX operation) changes, continues 2sec. |
Voltage drop | 1.2V or less | Output terminals for TAIL LAMP RELAY, POWER WINDOW RELAY, SAFETY POWER WINDOW, BURGLAR ALARM RELAY shall be 2.0V or less |
Item | Rated load |
Room lamp | DC 12V 21W (LAMP load) |
Key hole illumination | DC 12V 2W (LAMP load) |
Seat belt indicator | DC 12V 1.2W (LED load) |
Door lock relay | DC 12V 200mA (Inductive load) |
Door unlock relay | DC 12V 200mA (Inductive load) |
Dead lock relay | DC 12V 200mA (Inductive load) |
Hazard relay | DC 12V 200mA (Inductive load) |
Rear wiper relay | DC 12V 200mA (Inductive load) |
Power window relay | DC 12V 200mA (Inductive load) |
Wiper relay | DC 12V 200mA (Inductive load) |
Defogger relay | DC 12V 200mA (Inductive load) |
Tailgate relay | DC 12V 200mA (Inductive load) |
Tail lamp relay | DC 12V 200mA (Inductive load) |
Head lamp relay | DC 12V 200mA (Inductive load) |
Front deicer relay | DC 12V 200mA (Inductive load) |
Front fog relay | DC 12V 200mA (Inductive load) |
Rear fog relay | DC 12V 200mA (Inductive load) |
Horn relay | DC 12V 200mA (Inductive load) |
Security indicatior | DC 12V 1W (LED load) |
Central door lock indicator | DC 12V 1W (LED load) |
Door open indicator | DC 12V 1W (LED load) |
