Disconnect the negative(-) battery terminal.

Remove the vanity lamp lens (A) and then remove the bulb.

Remove the sunvisor (A) after loosening the screws (2EA).

Disconnect the sunvisor connector (A).

Install the vanity bulb.

Istall the vanity lamp lens.

Install the sunvisor assembly.

Disconnect the vanity lamp connector and check for continuity between terminals.

Remove the sunvisor assembly and check for continuity between terminals. If the continuity is not as specified, replace the vanity lamp or sunvisor.

(1)

Condition A

A.

Power ON : When mirror frame in the sunvisor is opened over 1.97in(50mm)

(2)

Condition B

A.

Lighting ON : When sunvisor is positioned within the vertical angle ±50° range.