2.
Remove the crash pad side lower panel (A).
(Refer to the BD group - "Crash pad")
[LHD]
[RHD]
Test the buzzer by connecting battery voltage to the 1 terminal and ground the 2 terminal.
The buzzer should make a sound. If the buzzer fails to make a sound, replace it.
Disconnect the negative (-) battery terminal.
Remove the crash pad side lower panel (A).
(Refer to the BD group - "Crash pad")
Remove the buzzer (A) after loosening the nut and disconnecting the 2P connector.
Installation is the reverse of removal procedure.
