2.
After loosening the seat assembly mounting bolts, remove the seat assembly (A).
Remove the seat assembly mounting cover.
After loosening the seat assembly mounting bolts, remove the seat assembly (A).
Disconnect the connectors, and remove the seat assembly.
Installation is the reverse of removal.
SEAT MOUNTING BOLT INSTALLATION PROCE-DURE (manual seat only)
Set the into the most rearward position.Check then each slide is locked, and then
Tighten the front mounting bolt temporarily.
Set the seat into most forward position.Check that each slide is locked, and thenTighten the rear mounting bolt completely.
Set the seat into the most rearward position.Check the front mounting bolt completely.
Check that the seat operates to and fro smoothyand the locking portion locks properly.
After loosening the recliner mounting screw, then remove the recliner lever (A) and height lever (B).
After loosening the mounting screws, then remove the recliner cover (C).
Gently detach the hook, remove the recliner cover (A).
Installation is the reverse of removal.
Remove front seat assembly.
Remove the recliner cover .
After disconnecting the scuff band, remove the seat back panel.
Disconnect the protector (A) from the back frame.
Remove the lumber sport lever.
Pull out the headrest guides (A) while pinching the end of the guides, and remove them.
After removing the tape on the front of seat back remove the seat back cover (A).
Installation is the reverse of removal.
Remove front seat assembly.
Remove the recliner cover.
After disconnect the protector (A), then remove the seat cushion (B).
After removing the hogring clip on the front of seat cushion and remove the seat cushion cover (A).
Installation is the reverse of removal.
Remove the following items.
Recliner cover
Seat back panel
Headrest guide
Seat back cover
After loosening the mounting bolts, then disconnect the seat back frame (A) and seat cushion frame (B).
Remove the side air bag for replacing side air bag installation seat.
Be fore service, be fully aware of precautions and service procedure relevant to air bag (Refer to page RT-Airbag)
Installation is the reverse of removal.
