3.
If measured value exceeds the standard value, replace the wheel.
Tighten the hub nuts as follows.
Tightening torque Nm (kgf.m, lb-ft):
90 ~ 110 (9.0 ~ 11.0, 65 ~ 80)
When using an impact gun, final tightening torque should be checked using a torque wrench.
Jack up the vehicle.
Measure the wheel Run-out by using a dial indicator as illustration below.
Run-out | Aluminum | Steel |
Radial mm(in) | Below 0.3(0.012) | Below 0.6(0.024) |
Lateral mm(in) | Below 0.3(0.012) | Below 0.8(0.031) |
If measured value exceeds the standard value, replace the wheel.
