4.
Monitor the "Lateral G Sensor, Yaw Rate Sensorr" parameter on the GDS.
Fig. 1) Test Condition : Ignition "ON" & Engine "ON".
Connect GDS to Data Link Connector(DLC).
IG "ON"..
Maintain the vehicle standing still.
Monitor the "Lateral G Sensor, Yaw Rate Sensorr" parameter on the GDS.
Fig. 1) Test Condition : Ignition "ON" & Engine "ON".
Is parameter displayed within specifications?
 | ▶ Fault is intermittent caused by poor connection in Yaw Rate & Lateral G sensor harness and/or HECU's connector or was repaired and HECU memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure. . |
 | ▶ Go to "Terminal and Connector Inspection" procedure. |
