2.
Disconnect the starter cable(A) from the B terminal on the solenoid, then disconnect the connector(B) from the S terminal.
Disconnect the battery negative cable.
Disconnect the starter cable(A) from the B terminal on the solenoid, then disconnect the connector(B) from the S terminal.
Remove the 2 bolts holding the starter, then remove the starter.
Tightening torpue
42.2~53.9 N.m (4.3~5.5 kgf.m, 31.1~39.8 Ib-ft)
Installation is the reverse of removal.
Connect the battery positive cable and negative cable to the battery.
