5.
Disconnect the Side Impact Sensor connector and remove the Side Impact Sensor mounting bolt.
Removal of the airbag must be performed according to the precautions/procedures described previously.
Before disconnecting the side impact sensor connector(s), disconnect the side airbag connector(s).
Do not turn the ignition switch ON and do not connect the battery cable while replacing the side impact sensor.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
Remove the lower anchor bolt.
Remove the door scuff trim. (Refer to BD group)
Remove the center pillar trim. (Refer to BD group)
Disconnect the Side Impact Sensor connector and remove the Side Impact Sensor mounting bolt.
