2.
Install the knuckle to the strut assembly and tighten mounting bolts (A) and nuts.
Tightening torque Nm (kgf.m, lb-ft) :
Bolts(A): 137.3~156.9 (14.0~16.0, 101.3~115.7)
Install the hub and knuckle assembly to the drive shaft.
Install the knuckle to the strut assembly and tighten mounting bolts (A) and nuts.
Tightening torque Nm (kgf.m, lb-ft) :
Bolts(A): 137.3~156.9 (14.0~16.0, 101.3~115.7)
Install the brake disc (A) to the front hub assembly, and tighten the screws (B).
Install the tie rod end ball joint (A) to the knuckle.
Install the nut and split pin.
Tightening torque Nm (kgf.m, lb-ft) :
23.5~33.3 (2.4~3.4, 17.4~24.6)
Install the ball joint assembly mounting nut (A) to the knuckle.
Tightening torque Nm (kgf.m, lb-ft) :
Bolt(A) : 98.1~117.7 (10~12, 72.3~86.8)
Install the washer (C), castle nut (A) and split pin (B) to the front hub assembly.
Tightening torque Nm (kgf.m, lb-ft) :
196.1~274.6 (20~28, 144.7~202.5)
The washer (C) should be assembled with convex surface outward when installing the castle (B) nut and split pin (A).
Install the brake caliper and then tighten the mounting bolts(A).
Tightening torque Nm (kgf.m, lb-ft) :
78.5~98.1 (8~10, 57.9~72.3)
Install the wheel speed sensor (A) to the knuckle.
Tightening torque Nm (kgf.m, lb-ft) :
6.9~9.8 (0.7~1.1, 5.1~7.2)
Install the wheel and the tire to the front hub.
Tightening torque Nm (kgf.m, lb-ft) :
88.3~107.9 (9~11, 65.1~79.6)
Be careful not to damage the hub bolts when installing the front wheel and tire.
