1.
Install the bushing (A) and the bracket (B) to the stabilizer bar.
Install the bushing (A) and the bracket (B) to the stabilizer bar.
Connect the stabilizer link (A) with the stabilizer bar by tightening the nut.
Tightening torque Nm (kgf.m, lb-ft):
100~ 120 (10.0 ~ 12.0, 72 ~ 87)
Install the stabilizer (B) to the sub frame by tightening the bracket mounting bolts (A).
Tightening torque Nm (kgf.m, lb-ft):
45 ~ 55 (4.5 ~ 5.5, 33 ~ 40)
Install the sub frame (E) and the sub frame stay by tightening the mounting bolts (A, C) and nuts (B, D).
Tightening torque Nm (kgf.m, lb-ft):
Sub fame mounting bolts (C) and nuts (D):
160 ~ 180 (16.0 ~ 18.0, 116 ~ 130)
Sub frame stay mounting bolts (A) and nuts (B):
45 ~ 55 (4.5 ~ 5.5, 33 ~ 40)
Tighten the rear roll stopper through bolt(A).
Tightening torque Nm (kgf.m, lb-ft):
50 ~ 65 (5.0 ~ 6.5, 36 ~ 47)
Tighten the front roll stopper through bolt ＆ nut (A).
Tightening torque Nm (kgf.m, lb-ft):
50 ~ 65 (5.0 ~ 6.5, 36 ~ 47)
Install the wire harness protector to sub frame by tightening the mounting bolts (A).
Install the muffler rubber hanger (A).
Connect the lower arm with the ball joint and then remove the castle nut and the split pin.
Connect the tie rod end with the knuckle and then install the castle nut and split pin.
Tightening torque Nm (kgf.m, lb-ft):
24 ~ 34 (2.4 ~3.4, 17 ~ 25)
Connect the stabilizer link (A) with the front strut assembly and then tighten the nut.
Tightening torque Nm (kgf.m, lb-ft):
100 ~ 120 (10.0 ~ 12.0, 72 ~ 87)
Connect the universal joint assembly (B) with the pinion of the steering gear box and then tighten the bolt (A).
Tightening torque Nm (kgf.m, lb-ft):
30 ~ 35 (3.0 ~ 3.5, 22 ~ 25)
Install the front wheel ＆ tire.
Tightening torque Nm (kgf.m, lb-ft):
90 ~ 110 (9.0 ~ 11.0, 65 ~ 80)
