2.
Installation is the reverse of removal.
note
●
Make sure the hood opens properly and locks securely.
●
Adjust the hood alignment.
When removing and installing the hood, an assistant is necessary.
Take care not to damage the hood and body.
When removing the clips, use a clip remover.
After loosening the hood hinge (E) mounting bolts,remove the hood (F).
Installation is the reverse of removal.
Make sure the hood opens properly and locks securely.
Adjust the hood alignment.
Using a clip remover, detach the clips, and remove the hood insulator (A).
Take care not to scratch the hood panel.
Installation is the reverse of removal.
Replace any damaged clips.
Detach the clips, then remove the hood weatherstrip (A). Take care not to scratch the hood.
Installation is the reverse of removal.
Replace any damaged clips.
Remove the hood weatherstrip (A).
Installation is the reverse of removal.
Replace any damaged clips.
After loosening the mounting screw, then remove the hood release handle (A).
Installation is the reverse of removal.
Make sure the hood latch cable is connected properly.
Make sure the hood locks securely.
Remove the radiator grille upper cover (A).
Loosen the bolts, then remove the hood latch cover(A).
Remove the hood latch (A) mounting bolts.
Disconnect the hood latch cable (A) and remove the latch (B).
Installation is the reverse of removal.
Make sure the hood latch cable is connected properly.
Make sure the hood locks securely.
