4.
Rotate the toothed wheel of adjuster by a screw driver until the disc is not moving, and then return it by 5 notches in the opposite direction.
Raise the vehicle, and make sure it is securely supported.
Remove the rear tire and wheel.
Remove the plug from the disc.
Rotate the toothed wheel of adjuster by a screw driver until the disc is not moving, and then return it by 5 notches in the opposite direction.
Raise the vehicle, and make sure it is securely supported.
Remove the floor console cover. (Refer to Body Group - "Console")
Adjust the parking brake lever (A) stroke by turning adjusting nut (B).
Parking brake lever stroke :
7 cliks (Pull the lever with 20kgf)
After repairing the parking brake shoe, adjust the brake shoe clearance, and then adjust the parking brake lever stroke. (Refer to "Parking brake shoe installation")
Release the parking brake lever fully, and check that parking brakes do not drag when the rear wheels are turned. Readjust if necessary.
Make sure that the parking brakes are fully applied when the parking brake lever is pulled up fully.
Install the floor console cover. (Refer to Body Group - "Console")
