Transaxle type | M6GF2 | |
Engine type | Diesel 2.0 | |
Gear ratio | 1st | 3.615 |
2nd | 1.794 | |
3rd | 1.542 | |
4th | 1.176 | |
5th | 0.921 | |
6th | 0.732 | |
Reverse | 3.416 | |
Final gear ratio | 4.063/2.955 | |
Items | Standard value [in(mm)] |
Input shaft rear bearing end play (At 70kgf load) | 0.0019T-0(0.05T-0) |
1st output shaft bearing end play (At 70kgf load) | 0.0019T-0.0039T(0.05T-0.10T) |
2nd output shaft front bearing end play (At 70kgf load) | 0.0019T-0.0039T(0.05T-0.10T) |
Differential bearing end play (At 70kgf load) | 0.0059T-0.0078T(0.15T-0.20T) |
T: Indicate tightening of -(minus) direction of end play
L: Indicate loosening of +(plus) direction of end play
Standard value | Nm | kgf.m | lb-ft | |
Oil drain plug | 60-80 | 6.0-8.0 | 43.4-57.9 | |
Oil filler plug | 30-35 | 3.0-3.5 | 21.7-25.3 | |
Shift control cable bracket on transaxle side | 15-22 | 1.5-2.2 | 10.9-16.0 | |
Rear roll support bracket bolt | 60-80 | 6.0-8.0 | 43.4-57.8 | |
Front roll support bracket bolt | 60-80 | 6.0-8.0 | 43.4-57.8 | |
Transaxle support bracket bolts | 60-80 | 6.0-8.0 | 43.4-57.8 | |
Transaxle mounting bracket bolts | 60-80 | 6.0-8.0 | 43.4-57.8 | |
Transaxle upper mounting bolts | 60-80 | 4.3-5.5 | 43.4-57.8 | |
Transaxle lower mounting bolts | to ENG. Oil pan | 30-42 | 3.0-4.2 | 21.7-30.4 |
to ENG. Block | 60-80 | 6.0-8.0 | 43.4-57.8 | |
Always follow torque tightening levels. Failure to follow such levels can result in parts breaking if over-tightened or loosening if under-tightened. In either case, serious personal injury or death could result to vehicle occupants.
Items | Recommnend lubricant | Quantity |
Transaxle gear oil | SAE 75W/85 API GL-4 TGO-7(MS517-14) ZIC G-F TOP 75W/85 HD GEAR OIL XLS 75W/85 | 1.9L(2.0US qt, 1.67lmp qt) |
Air bleeder | MS721-38 | As requried |
Transaxle housing | MS721-40 or MS721-38 | As requried |
Surface of release fork and bearing | Grease (CASMOLY L9508) | As requried |
