2.
Remove the air cleaner assembly.
(1)
Disconnect the air cleaner hose (A) and the bleeder hose (B).
(2)
Disconnect the PCM connectors (C).
(3)
Remove the air cleaner assembly (D).
Tightening torque :
7.8 ~ 9.8 Nm (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 Ib-ft)
Disconnect the battery negative cable.
Remove the air cleaner assembly.
Disconnect the air cleaner hose (A) and the bleeder hose (B).
Disconnect the PCM connectors (C).
Remove the air cleaner assembly (D).
Tightening torque :
7.8 ~ 9.8 Nm (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 Ib-ft)
Disconnect the starter cable (B) from the B terminal on the solenoid, then disconnect the connector (A) from the S terminal.
Remove the 2 bolts holding the starter, then remove the starter.
Tightening torque :
42.2 ~ 53.9 Nm (4.3 ~ 5.5 kgf.m, 31.1 ~ 39.8 Ib-ft)
Installation is the reverse of removal.
Connect the battery negative cable to the battery.
