You can use a Bluetooth device in your car to make a hands-free phone call or to stream music onto your in-car speakers (via this Head Unit). This Head Unit supports HFP, A2DP and AVRCP connection.
This profile defines how high quality audio(stereo or mono) can be streamed from onedevice to another over a Bluetooth connection.For example: music streamed from amobile phone to a wireless headset or caraudio.
This profile is designed to provide a standardinterface to control TVs, Hi-fi equipment,etc. to allow a single remote control (or otherdevice) to control all of the A/V equipment towhich a user has access. It may be used inconcert with A2DP or VDP.
This is commonly used to allow car handsfreekits to communicate with mobile phonesin the car.
Some functions (e.g. starting of speech recognition) are not supported by all mobile phones. We cannot guarantee that all functions described will be supported by all mobile phones with Bluetooth.
This function allows you to add a new phone to the Head Units Bluetooth Device List. Maximum of 5 devices can be added to the list. If the list is full, the oldest device will be replaced by the newly added Bluetooth device, based on last pairing date.
To pair your Bluetooth-enabled device to this Head Unit, make sure that no device is currently streaming to this Head Unit first.
Short press the SETUP button to enter the Setup menu.
Short press the ▼ or ▲ button to access the Bluetooth sub-menu.
Now select “New Device”.
Press the ▼ or ▲ button to select the number of the first digit.
Press the < or > button to select the next digit.
Repeat the above steps for the other three digits.
Press the OK button to confirm the 4-digit PIN for authentication and activate the “Discoverable Mode“.
In “Discoverable Mode” the Head Unit broadcasts a Bluetooth ID.
Look for the “KIA-BLUETOOTH“ on your Bluetooth device.
Enter identically the same PIN in your Bluetooth device and authenticate pairing on your Bluetooth device.
When pairing is established, the ID of the Bluetooth device and the service list info will be stored in the Head Unit Bluetooth Device List.
With this function you can browse through and select bluetooth devices that are stored in the Head Unit Bluetooth Device List.
Short press the SETUP button to enter the Setup menu.
Short press the ▼ or ▲ button to access the Bluetooth sub-menu.
Press the > button to browse the Device List to select the required device.
Press the OK button to start pairing between the selected device and the Head Unit.
Whenever there is at least one connecteddevice active, in the display the Bluetooth icon is visible.
This function allows you to delete a Bluetooth device ID from the Head Unit Bluetooth Device List.
Short press the SETUP button to enter the Setup menu.
Short press the ▼ or ▲ button to access the Bluetooth sub-menu.
Press the > button to select Delete Device.
Press the OK button to delete the selected device from the Head Unit Bluetooth Device List.
Short press the SETUP button to enter the Setup menu.
Short press the ▼ or ▲ button to access the Bluetooth sub-menu.
Select the option “Phone Volume”.
Press the < or > button to decrease or increase the phone volume setting.
Default setting: 12
Setting range: 3 ... 25
During an ongoing call, user is allowed toadjust the BT Phone volume. The adjustedvolume is memorized into Phone Volumesetting.
Press the Call button on the Steering Wheel Remote Control to accept an incoming call.
Press the End Call button on the Steering Wheel Remote Control to terminate or reject a call.
Short press the Call button on the Steering Wheel Remote Control to re-dial last dialled number (one attempt).
Long press the Call button on the Steering Wheel Remote Control to re-dial last dialled number (two attempts).
This function allows you to have a private call even if the phone is connected to the Head Unit.
Press the Call button on your phone to start a private call.
OR
Press the End Call button on your phone to end a private call.
This function allows you to transfer a call during an ongoing call.
From the tuner to the phone
From the phone to the tuner
Long press the Call button on the Steering Wheel Remote Control to transfer the ongoing call back to the phone or back to the tuner again.
This function allows the Head Unit to start streaming music from phone.
The Bluetooth device must be connected with the Head Unit.
Press the AUX button and select BT AUDIO.
The Head Unit starts streaming the audio from the phone and will start playing the audio files.
The Head Unit has no control on the sequence of track playback in phone.
This function allows you to select the next/ previous track of phone‘s music player by using the next/previous track buttons on the Head Unit or Steering Wheel Remote Control.
Short press the < or > button on the Head Unit or the Steering Wheel Remote Control.
This function allows you to suspend streaming music from the phone to the Head Unit.
Short press the Mute button on the Steering Wheel Remote Control.
Press the AUX button and de-select BT AUDIO.
