2.
Remove the front wheel and tire from front hub.
caution
Be careful not to damage to the hub bolts when removing the front wheel and tire.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
Remove the front wheel and tire from front hub.
Be careful not to damage to the hub bolts when removing the front wheel and tire.
Remove the wheel speed sensor (A) from the knuckle.
Remove the brake caliper mounting bolts (A), and then place the brake caliper assembly (B) with wire.
Remove the split pin (B), then remove castle nut (A) and washer (C) from the front hub under applying the break.
Remove the ball joint assembly mounting nut (A) from the knuckle.
Remove the split pin and castle nut and then disconnect the tie rod end (A) from the front knuckle by using a SST (09568-34000).
Remove the brake disc (A) from the front hub assembly after remove the screws (B).
Remove the strut assembly mounting bolts (A) and nuts.
Remove the hub and knuckle assembly.
Be careful not to damage the boot and rotor teeth.
