2.
After raise the lower anchor cover (A), loosen the lower anchor mounting bolt (B).
When installing the belt, make sure not to damage the pretensioner.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
After raise the lower anchor cover (A), loosen the lower anchor mounting bolt (B).
Remove the center pillar lower trim.
Remove the center pillar upper trim.
After disconnecting the pretensioner connector lock pin, remove the SIS connector (B), Loosen the mounting bolt, then remove the pretensioner (C).
Remove the following items first.
Front seat assembly.
Door scuff trim.
Front seat belt.
Center pillar trim.
After loosening the mounting bolt, then remove the height adjuster (A).
Installation is the reverse of removal.
Remove the following items first.
Front seat assembly.
Remove the wire harness of buckle from seat.
Remove the seat belt buckle (A).
Installation is the reverse of removal.
When installing the belt, make sure not to damage the pretensioner.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
After raise the lower anchor cover (A), loosen the lower anchor mounting bolt (B).
Tightening torque :
4.0~5.5kgf.m (39.2~53.9N.m, 28.9~39.8lb-ft)
Remove the door scuff trim (A).
Remove the rear guarter trim (A).
Remove the B pillar upper trim (A).
Remove the upper anchor (A).
After disconnecting the pretensioner connector lock pin, remove the SIS connector, Loosen the mounting bolt, then remove the pretensioner (C).
Remove the following items first.
Front seat assembly.
Door scuff trim.
Front seat belt.
Center pillar trim.
After loosening the mounting bolt, then remove the height adjuster (A).
Tightening torque :
4.0~5.5kgf.m (39.2~53.9N.m, 28.9~39.8lb-ft)
Installation is the reverse of removal.
Remove the following items first.
Front seat assembly.
Remove the wire harness of buckle from seat.
Remove the seat belt buckle (A).
Installation is the reverse of removal.
