Component Inspection
1.

After connecting scantool, Check DTC.

2.

Using scantool, Clear DTC.

3.

IG "OFF" and the IG "ON", again.

4.

Again using scantool, Check DTC present.

5.

Is the same DTC shown, agian?

▶ Substitute with a known-good solenoid valve ASS'Y and check for proper operation. If problem is corrected, replace solenoid valve ASS'Y and then go to "Verification of Vehicle Repair" procedure.

▶ Fault is intermittent caused by poor connection in solenoid valve ASS'Y or ALS ECU's connector or was repaired and ALS ECU memory was not cleared.

▶ Repair or replace as necessary and then go to "Verification of Vehicle Repair" procedure.

Яндекс.Метрика