6735295

Perform vehicle selection and Level Initialization with GDS as follows. And then, check "Actuator" parameter on GDS(It must be unloaded vehicle condition)

Specification : 80% ± 2%

Fig.1) Vehicle Selection and Level Initialization

Fig.2) Engine ON : AHLS of Actuator

Are "Vehicle selection & Level Initalization" and current data normal?

	▶ Go to "Verification of Vehicle Repair" procedure.
	▶ Substitute with a known-good "AHLS-ECM(SENSOR)" and check for proper operation. If the problem is corrected, replace "AHLS-ECM(SENSOR)" and then go to "Verification Vehicle Repair" procedure.

caution

Perform Vehicle Selection and Level Initialization with GDS if AHLS ECM is repalce. (Auto Levelling Sensor)