6.
Does change of sensor power supply occur as connecting sensor connector?
 | ▶ Replace related sensors.(A/C PT/VSCA) |
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
IG key OFF.
Disconnect 'A/C PRESSURE TRANSDUCER' connector and 'VARIABLE SWIRL CONTROL ACTUATOR' connector.
Check that sensor connector power supply is within the specification after turning IG key ON.
Connect A/C PT connector and VSCA in turn.
Measure the voltage of power circuit of each sensor with all connector connected.
Specification : Sensor power supply should not change as connecting A/C PT connector, VSCA connector.
☞ If the change of sensor power supply occur as connecting sensor connector, this means the occurrence of short inside of sensor.
Does change of sensor power supply occur as connecting sensor connector?
| ▶ Replace related sensors.(A/C PT/VSCA) |
| ▶ Go to "Verification of Vehicle Repair" procedure. |
