Many malfunctions in the electrical system are caused by poor harness and terminal connections.

Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.

Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.

Has a problem been found?

	▶ Repair as necessary and go to "Verification of Vehicle Repair" procedure.
	▶ Go to "Control Circuit Inspection" procedure.

With ignition OFF, disconnect alternator connector

IG KEY "ON" & ENG "OFF"

Measure voltage between FR terminal of the alternator harness connector and chassis ground.

Is voltage within the specification?

	▶ Go to "Component Inspection" procedure.
	▶ Repair as necessary and go to "Verification of Vehicle Repair" procedure.