Once IPM receives rear left turn signal lamp switch working signal, it sends the signal to RAM by CAN communition. RAM makes rear left turn signal lamp flickering.
This code is set when rear left turn signal lamp circuit is shotted to ground for more than 150ms during rear left turn signal lamp operating.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Load Mornitoring |
•
Poor connection
•
Short to ground in rear left turn signal lamp circuit
•
Faulty rear left turn signal lamp
•
Faulty RAM |
Enable Conditions |
•
IG KEY ON. | |
Threshold Value |
•
It is abnormal if output voltage is 0V. | |
Diagnostic Time |
•
Immediately | |
DTC Erasing Time |
•
DTC is erased immediately after trouble fixed. |
