Once IPM receives rear left turn signal lamp switch working signal, it sends the signal to RAM by CAN communition. RAM makes rear left turn signal lamp flickering.
This code is set when rear left turn signal lamp circuit is open for more than 150ms during rear left turn signal lamp operating.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Load Mornitoring |
•
Poor connection
•
Open in rear left turn signal lamp circuit
•
Faulty rear left turn signal lamp
•
Faulty RAM |
Enable Conditions |
•
IG KEY ON. | |
Threshold Value |
•
It is normal if output voltage is 12V. | |
Diagnostic Time |
•
Immediately | |
DTC Erasing Time |
•
DTC is erased immediately after trouble fixed. |
