Once IPM receives taillamp switch working signal, it sends the signal to RAM by CAN communition. RAM turns on the right taillamp.
This code is set when right taillamp circuit is open for more than 150ms during right taillamp operating.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Load Mornitoring |
•
Poor connection
•
Open in right taillamp circuit
•
Faulty right taillamp
•
Faulty RAM |
Enable Conditions |
•
IG KEY ON. | |
Threshold Value |
•
It is normal if output voltage is 12V. | |
Diagnostic Time |
•
Immediately | |
DTC Erasing Time |
•
DTC is erased immediately after trouble fixed. |
