Component Location
General Description

Once IPM receives fog lamp switch working signal, it sends the signal to RAM by CAN communition. RAM turns on fog lamp

DTC Detecting Condition

This code is set when left front fog lamp circuit is shortted to ground for more than 150ms during Rear Fog Lamp operating.

DTC Detecting Condition

Item

Detecting Condition

Possible Cause

DTC Strategy

Load Mornitoring

Poor connection

Short to ground in Rear Fog Lamp circuit

Faulty Rear Fog Lamp.

Faulty RAM

Enable Conditions

IG KEY ON.

Threshold Value

It is abnormal if output voltage is 0V.

Diagnostic Time

Immediately

DTC Erasing Time

DTC is erased immediately after trouble fixed.

Diagnostic Circuit Diagram
Яндекс.Метрика