Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.

Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.

Has a problem been found?

	▶ Repair as necessary and go to "Verification of Vehicle Repair" procedure.
	▶ Go to "Rear Fog Lamp Circuit Inspection" procedure.

IG "OFF", disconnect battery (-) terminal.

Disconnect RAM connector.

Measure resistance between the Rear Fog Lamp terminal of RAM harness connector and ground of the Rear Fog Lamp.

Is the measured resistance within specification?

	▶ Substitute with a known - good RAM and check for proper operation. If the problem is corrected, replace the RAM and go to "Verification of Vehicle Repair" procedure.
	▶ Repair open in circuit of Right Fog Lamp or Right Fog Lamp internal open, and go to "Verification of Vehicle Repair" procedure.