2.
Remove the water hose and pipe assembly (A).
Remove the intake manifold and exhaust manifold. (Refer to Intake and exhaust system in this group)
Remove the water hose and pipe assembly (A).
Remove the water outlet duct (A).
Remove the cylinder head (A). (Refer to Cylinder head assembly in this group)
Remove the oil filter (A) and oil cooler (B).
Tightening torque :
19.6 ~ 26.5N.m (2.0 ~ 2.7kgf.m, 14.5 ~ 19.5lb-ft)
Installation is reverse order of removal.
Check if there are rubber pickings between the oil filter and the block or the oil cooler. If so, apply engine oil.
