4.
Disconnect the negative cable(A) from the battery.
Use fender covers to avoid damaging painted surfaces.
To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
Mark all wiring and hoses to avoid misconnection.
First, remove the transmission before removing the engine. (Refer to AT group)
Remove the hood. (Refer to BD group)
Remove the cowl cover and wiper arm. (Refer to BE group)
Disconnect the negative cable(A) from the battery.
Remove the engine cover (A).
Remove the radiator grill upper guard (A).
Loosen the drain plug and drain the engine coolant.
Remove the radiator cap (A) to speed draining.
Recover refrigerant. (Refer to Air conditioner compressor in HA Group)
Disconnect the AFS connector (A) and breather hose (B) and then remove the air cleaner assembly (C).
Disconnect the radiator upper hose (A) and lower hose (B).
Disconnect the heater hoses (A), the fuel hose (B), the purge control solenoid valve (PCSV) hose (C) and the brake booster vacuum hose (D).
Remove the engine wire harness from the fuse and relay block.
Remove the ECM connector (B) and the fuse and relay block cover (A).
Remove the connectors (A) and the cable (B) from the fuse and relay block.
Remove the fuse and relay block (C).
Remove the fuse and relay block connector (A) and the multi connector (B).
Remove the fuse and relay block lower cover (A).
Remove the connector (A) from the fuse and relay block lower cover bracket.
Remove the earth cable (A) and the harness protector (B).
Disconnect the fan connector (A) and remove the cooling fan assembly (B).
Remove the air conditioner high pressure pipe (A). (Refer to HA group)
Disconnect the alternator connect (A), cable (B), A/C connector (C), ground cable (D) and then remove the starter protector (E).
Disconnect the starter connector (A), cable (B) and then remove the wiring protector.
Disconnect the ground cable (A).
Remove the TCU (A) and disconnect the ground cable (B).
Remove the engine mounting bracket nuts (A).
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Remove the engine assembly from the vehicle by using hoist.
When removing the engine assembly, be careful not to damage any surrounding parts or body components.
