1.
Install the oil pump assembly (A) and then oil pump sprocket (B).
Tightening torque :
Oil pump assembly bolts :
19.6 ~ 23.5Nm ( 2.0 ~ 2.4kgf.m, 14.5 ~ 17.4lb-ft)
Oil pump sprocket bolts :
21.6 ~ 25.5Nm ( 2.2 ~ 2.6kgf.m, 15.9 ~ 18.8lb-ft)
Install the oil pump assembly (A) and then oil pump sprocket (B).
Tightening torque :
Oil pump assembly bolts :
19.6 ~ 23.5Nm ( 2.0 ~ 2.4kgf.m, 14.5 ~ 17.4lb-ft)
Oil pump sprocket bolts :
21.6 ~ 25.5Nm ( 2.2 ~ 2.6kgf.m, 15.9 ~ 18.8lb-ft)
Install the upper oil pan.
Using a gasket scraper, remove all the old packing material from the gasket surfaces.
Before assembling the oil pan, the liquid sealant TB1217H or LT5900H should be applied on upper oil pan.
The part must be assembled within 5 minutes after the sealant was applied.
Bead width : 2.5mm(0.1in)
Clean the sealing face before assembling two parts.
Remove harmful foreign materials on the sealing face before applying sealant.
When applying sealant gasket, sealant must not protrude into the inside of oil pan.
To prevent leakage of oil, apply sealant gasket to the inner threads of the bolt holes.
Install the upper oil pan.
Uniformly tighten the bolts in several passes.
Tightening torque :
9.8 ~ 11.8Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Install the lower oil pan.
Using a gasket scraper, remove all the old packing material from the gasket surfaces.
Before assembling the oil pan, the liquid sealant TB1217H or LT5900H should be applied on lower oil pan.
The part must be assembled within 5 minutes after the sealant was applied.
Bead width : 2.5mm(0.1in)
Clean the sealing face before assembling two parts.
Remove harmful foreign materials on the sealing face before applying sealant.
When applying sealant gasket, sealant must not protrude into the inside of oil pan.
To prevent leakage of oil, apply sealant gasket to the inner threads of the bolt holes.
Install the lower oil pan.
Uniformly tighten the bolts in several passes.
Tightening torque :
9.8 ~ 11.8Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Install the oil filter and oil cooler assembly (A).
Tightening torque :
Oil filter assembly bolts :
19.6 ~ 23.5Nm ( 2.0 ~ 2.4kgf.m, 14.5 ~ 17.4lb-ft)
Oil cooler bolts :
9.8 ~ 11.8Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
Refill the engine oil.
